 |
ATCs 840 STACKER
Best Modder of Tower Mod Category
Owner : coolmiester
Location : United Kingdom
Chassis : ACTS 840
“At the start of this build there was very little in the retail case department to accommodate the EVGA SR-2 motherboard due to its unconventional size so it was clear from the get-go that not only was a larger case and motherboard tray needed to mount the board but also it was going to need some serious cooling so additional space was needed to mount the cooling hardware. The plan was to literally chop the top off a Coolermaster ATCs 840 and stack it on top of another which would give it approx. 5" (or three drive bays) extra height which could be used to store two 480 radiators, hence the name ATCs 840 STACKER. Also, high on the agenda was to make the three quite complicated watercooling loops look effortless and easy on the eye. My main aim was to regain the basic look of the 840 so a second look would be needed to work out just what was going on and an overall factory finish would be a must throughout.”
More :
http://forum.coolermaster.com/viewtopic.php?f=49&t=14945
Total scores : 78.44 (CM judges: 53.77 + Public vote: 24.67) |
 |
TRON Lightcycle PC
Best Modder of Scratch Build Category
Owner : Boddaker
Location : United States
“I love the TRON movies, and when the new movie came out, I just had to build a PC based on the new Lightcycle design. It would have to be a custom build, so a lot of time was spent in a 3D program, trying to fit the necessary components while keeping the relative size down. The main parts were laser cut from acrylic, providing a solid foundation from which to fabricate other parts such as the front and rear fenders. So far, this has been a fun and rewarding project. Enjoy!”
More : http://forum.coolermaster.com/viewtopic.php?f=49&t=14728
Total scores : 88.00 (CM judges: 60.05 + Public vote: 27.95)
|
 |
CM-HAF-XL
Second Place Winner of Tower Mod Category
Owner : kier
Location : Netherlands
Chassis : HAF X
“Wanted to make i very clean case with watercooling and straight tubes, with the colors black and green and. just as clean as possible with a beautiful case, the ‘Haf-X’”
More : http://forum.coolermaster.com/viewtopic.php?f=49&t=14591
Total scores : 76.84 (CM judges: 48.84 + Public vote: 28.00) |
 |
L3p D3sk
Second Place Winner of Scratch Build Category
Owner : L3p
Location : Netherlands
“Thought about an all-in-one desk. Points I thought of were: Lots of storage : 10TB+ Overclock potentional : 4,5Ghz+ Nice to look at and completely made of aluminum and glass Watercooled No cables in sight Easy to change hardware And most important, completely silent with cooling beneath my house.”
More : http://forum.coolermaster.com/viewtopic.php?f=49&t=14742
Total scores : 87.42 (CM judges: 57.42 + Public vote: 30.00) |
 |
BETA
Second Place Winner of Scratch Build Category
Owner : Gtek
Location : Slovak Republic
“Compact, secondary (LAN), microATX based system, very unique design dominated by contrast, single fan positive pressure cooling.”
More : http://forum.coolermaster.com/viewtopic.php?f=49&t=14833
Total scores : 77.90 (CM judges: 56.77 + Public vote: 21.14) |
 |
USS EURISKO - Intrepid Mark II Class
Honorary Second Place Winner of Scratch Build Category
Owner : ASPHIAX
Location : Netherlands
“As a big SciFi fan I always watched Star Trek Voyager and wondered how cool it would be to have a PC that looked like the Voyager. So I descided to build it! I am totally hooked on watercooling so that was an easy choice. It will feature remote controlled electromotors that can move the wings up and down and the Phaser banks (beamweapons) will be fitted with leds and lasers. It is constructed of XPS foam, Glassfiber/Epoxy, Depron and Epoxy Clay. There's tons more details but you will have to check the buildlog. Thanks for watching and dont forget to vote for the USS EURISKO!”
More : http://forum.coolermaster.com/viewtopic.php?f=49&t=14940 |
 |
Usonian
Third Place Winner of Tower Mod Category
Owner : slipperyskip
Location : United States
Chassis : CM 690 II Advanced
“A Frank Lloyd Wright inspired computer enclosure. Made from teak, mahogany and basswood.”
More :
http://forum.coolermaster.com/viewtopic.php?f=49&t=14711
Total scores : 76.40 (CM judges: 51.07 + Public vote: 25.33) |
 |
BIO-WARFARE
Third Place Winner of Tower Mod Category
Owner : masbuskado
Location : United States
Chassis : HAF X
“I’ve transformed the HAF X into a War Machine to battle the Opprezzors in an uncertain war but confident that our brotherhood will prevail. You will never kill US ALL... Viva La Revolution!!! Never work with a plan, never do something for fame or for money... modding is my passion... so there are NOT any ideas, plans or concept involved in this project. Just pure creativity and hard work...”
More :
http://forum.coolermaster.com/viewtopic.php?f=49&t=14713
Total scores : 69.30 (CM judges: 53.30 + Public vote: 16.00) |
 |
Dead Rising 2 Mod
Third Place Winner of Tower Mod Category
Owner : modscases.com
Location : United States
Chassis : Elite 330
“I love Coolermaster cases i like to mod my idea on this case i like dead rising 2 game so i decided to mod it :D”
More :
http://forum.coolermaster.com/viewtopic.php?f=49&t=14721
Total scores : 68.33 (CM judges: 45.66 + Public vote: 22.67) |
 |
LAMENT CONFIGURATION
Third Place Winner of Scratch Build Category
Owner : Tortured_soul
Location : Colombia
“I am a great fan of the terror’s films, for that reason i made the mod that i present you. it is inspirated in the film ‘Hellraiser (1987)’; it is my cube’s version named ‘Lament Configuration’.”
More :
http://forum.coolermaster.com/viewtopic.php?f=49&t=14733
Total scores : 75.16 (CM judges: 51.30 + Public vote: 23.86) |
 |
PC-Reforged
Third Place Winner of Scratch Build Category
Owner : Abbas-IT
Location : Germany
“With this Case I have tried my best to pay tribute the two letters that have changed the world. ‘P’ and ‘C’. ‘PC-Reforged’ is the result of ca. 4 months of work and many mind boggling hours of geometric hurdles. Getting the geometry right was the biggest challenge with this case. I literally forced myself into this case form just to see if I could make it.”
More :
http://forum.coolermaster.com/viewtopic.php?f=49&t=15024
Total scores : 69.47 (CM judges: 54.47 + Public vote: 15.00) |
 |
Sors Salutis
Third Place Winner of Scratch Build Category
Owner : AnG3L
Location : Cyprus
“The idea behind this mod, was to create something different than the regular box shaped case. Also it had to be composed by 2 different compartments, one for the radiators and one for the main hardware. Those compartments had to be removable for easier transfer and assembly. The main materials used for this mod is acrylic and wood. The artistic painting techniques I used are 5 in total and the main colors are white, red and black. Those techniques are invented by me and it took me several years to achieve maximum perfection and durability. The name Sors Salutis is inspired by the song Carmina Burana by Carl Orff.”
More : http://forum.coolermaster.com/viewtopic.php?f=49&t=14785
Total scores : 68.49 (CM judges: 56.22 + Public vote: 12.27) |
 |
SERAPH
BONUS Prize Winner
Owner : KITSON CHAN
Location : Hong Kong
“The design concept for Seraph was aimed to having a both a Noble and a Cold theme. This was achieved by making the case look completely different when in lighting and in the dark.”
More : http://forum.coolermaster.com/viewtopic.php?f=49&t=15048 |
|
